Replica MKII (S) Sten Gun silencer for a DENIX MKII Sten Gun

Replica MKII (S) Sten gun silencer for a DENIX MKII sten gun.

This replica silencer will fit on your DENIX Sten by removing the original barrel and then replacing with the silencer tube. Due to the high tolerance of the machining it’s a close tight fit and it will require a flat head screwdriver to remove original barrel to wedge it up and then a wooden mallet to knock the new silencer on. 

Please note there are no baffles inside and is NOT to be used on a firing gun. It will not reduce any noise its a replica.

• Overall size: 330 x 38 mm (length x diameter)
• Made of steel and finished in a Grey paint 
• Smooth end to push onto fit a Denix sten gun 

In January 1943 resistance groups asked for a silenced version of the sten gun and so the MKII silencer was developed to retro fit onto a MKII sten gun.The design called for the barrel nut and barrel to be removed removed by unscrewing them. The silencer, with built in barrel, is then fitted. The silencer had a series of 18 internal baffles to help suppress the sound. Lower power ammunition, a lighter spring and breach were required when using the silencer